Video demonstration coming soon...

Installation



Setting up a campervan with Romp is easy. Router orders come with a simple screw template to allow quick wall mounting, and you can place the router in a cupboard or concealed location without issue.


Wall mounting the router is easy:


  1. Wall Template
    Romp Wall Template

  1. Decide on a good spot for the router (NB: this should be close the power source* you will be using.)


  2. Position the Romp template on wall in the decided location, marking the screw holes with a marker.

    Step 1


  3. Drill two pilot holes, then screw the screws provided into the wall just enough to secure into position.

    Step 2

    Step 3


  4. Place template back into position on the screws and screw all the way in.

    Step 4

    Step 5

    Step 6


  5. Remove template by sliding forward.

    Step 7


  6. Place the router on the screws and connect power and antenna.

    Step 8






Romp is ready to use!


*Romp routers come default with 12v Cigarette Lighter Lead. Contact support if your campervan requires an alternative.